 |
 |
 |
AM003 Med Long Mask
Height 4.8cm x Width 2.2cm |
Mask Necklace
using
AM003 Med Long Mask
Mix of Gold and Brown Premo.
|
Earrings
using
AM003 Med Long Mask
Using a blend of translucent, red, and white Sculpey III and Premo, gold Pearl
Ex, and jewellery findings.
|
 |
 |
 |
Bookmark
using
AM003 Med Long Mask
AM034 Med Mask
AM146 Lge African Shield no.1
Using a blend of leftover clays, LizZed Creations papers, black card, and suede
thonging. The bookmark style is inspired by the work of Kathy Martin.
|
Brooch
using
AM003 Med Long Mask
Also Lime, Emerald and Black Sculpey III. Sealed with Pledge One Go.
The larger picture will reveal earrings I made to go with the brooch.
|
African Bookmark
using
AM003 Med Long Mask
The mask was cast in white, gold and black Premo, and rubbed with black RubOns.
Paper by LizZed Creations.
The bookmark style is inspired by the work of Kathy Martin. |
 |
 |
|
Bead Necklace
using
AM003 Med Long Mask
Cast with gold and chocolate Sculpey III, glass beads, strung on tiget tail.
|
Card
using
AM003 Med Long Mask
AM059 Med Witch Doctor
AM146 Lge African Shield no.1
AM166 XLge African Oval
RP293 Lge Crackle
RP404 Med Splatters
Moulds cast with Delight Air Dry Modelling Compound, painted with Burnished
Copper and Celadon Jo Sonja Paints. Stamp in 4 segments behind the masks by
After Midnight Artstamps.
|
|
|
 |
 |
 |
AM020 Med Ceiling Rose
Diameter 3.5cm |
Necklace and
Matching Earrings
using
AM020 Med Ceiling Rose (full and partial)
Technique based on the Mokume Gane, using Premo Gold, Cobalt Blue mixed with a
bit of translucent, and Gold mixed with Yellow, as well as gold leaf.
The pieces were cast, holes were pierced, and they were cured. They were then
varnished with Pledge One Go.
|
 |
 |
 |
Pendant and
Earrings Set
using
AM020 Med Ceiling Rose (full and partial)
Also used a mix of Premo and Sclupey III Clay, gold leafing flakes, Gold Pearl
Ex, and Pledge One Go as sealant. |
ATC or Notebook
using
AM020 Med Ceiling Rose
AMKT4 X4Lge Rococo Texture
Inspired by Jeni Calkin's Shadow Box Project. Using the
Texture SHeet and some gyprock tape. Both the ATC and the Ceiling Rose were
painted and highlighted with acrylic paints (antique blue, and gold).
This notebook can accomodate any ATC. Slits were cut in the plastic cover, and
the ATC inserted. Change the ATC to match your mood.
|
 |
 |
|
Eyes
using
AM138 Lge Fleur Distressed
AM020 Med Ceiling Rose
RP206 XLge Lady with Shawl (partial)
OR3356H XLge (Polymer) Rectangular Eyes
RP410 Lge Boxed In
More information in France's cards section
|
Post It Note Booklet
using
AM020 Med Ceiling Rose
Mould cast with Opals, and highlighted with Pearl Blue Lumiere. Papers from
About Art Accents. |
|
|
 |
 |
 |
AM024 Med Feather
Height 4.1cm x Width 1.1cm |
ATC
using
AM024 Med Feather
AM030 XLge Mummy
AM068 Med Egyptian Cat Fragment
Moulds cast in gold and black Premo! Coated with Pledge One Go after curing.
Background is Marvy Metallic Markers and embossing powders.
|
Charm, Pendant,
or single Earring
(or
bookmark!)
using
AM024 Med Feather
AM115 Med Dragon Phoenix Coin
Moulds cast with a blend of Translucent and Black Sculpey III. Rubbed with
Silver Pearl Ex prior to curing.
This pendant was eventually used
on a
bookmark.
|
 |
 |
 |
ATC
using
AM024 Med Feather
Moulds cast with a marbling of Gold, Brown, and a mix of gold and dark red Premo
and Sculpey III polymer clay. Cured and not varnished. Adhered to the card with
Ranger's Glossy Accents. Stamp by Non Sequitur, handmade painted background.
|
Pendant
using
AM024 Med Feather
AM196 Lge Keyhole Diamond
Cast with a mix of Premo, Sculpey and Kato Clays. Cured, and assempled. No
varnish was used on this piece.
|
Oriental
Booklet - Nature
using
AM024 Med Feather
Made with Sculpey III translucent and a wee bit of Leaf Green to imitate jade.
Antique Bronze Pearl Ex was brushed on the casting (with a finger) before
curing.
Varnished with Pledge One Go.
The large image will give you details of the whole booklet.
|
 |
|
|
Samurai Man
using
AM024 Med Feather
AM041 XLge Asian Symbol No 1
AM042 XLge Asian Symbol No 2
AM043 XLge Asian Symbol No 3
for more information see France's Screen Project. |
|
|
|
 |
 |
 |
AM025 Med Fossil
Height 3.5cm x Width 2.5cm
|
Fossil Earrings
using
AM025 Med Fossil
AM254 Med Mini Fossil
Technique based on the Mokume Gane, using Premo Gold, Cobalt Blue mixed with a
bit of translucent, and Gold mixed with Yellow, as well as gold leaf.
The pieces were cast, holes were pierced, they were rubbed with Aztec Gold Pearl
Ex and they were cured. They were then
varnished with Pledge One Go. Also used gold jumprings and earring hooks.
|
Necklace
using
AM025 Med Fossil
AM254 Med Mini Fossil
Using translucent Sculpey III and a mix of red and white and translucent clays
to make pink. This technique is based on a faux-wood/faux ivory technique. The
pieces were rubbed with silver Rub Ons,a nd put together using plastic beads,
seed beads, jewellery findings and Bali beads and bails.
|
 |
 |
 |
Fossil Earrings
and Pendant
using
AM025 Med Fossil
AM254 Med Mini Fossil
Technique based on the Būcheron Coquet from
Parole de Pāte. A cane done with various colours of Sculpey III. The pieces
were moulded, pierced, cured, and glazed with Pledge One Go (Future Floor Finish
equivalent here in Australia).
The pendant can be strung on a chain, on a choker wire, or on a black leather
lanyard.
|
Hair Clip
using
AM025 Med Fossil
Technique based on the Būcheron Coquet from
Parole de Pāte. A cane done with various colours of Sculpey III. The pieces
were cast, and carefully mounted onto a hair clip base, and cured. The metal
base had to be adhered to the polymer clay after curing. I use Cabot's Gloss
Varathane to glaze the fossils.
|
Bookmark
using
AM025 Med Fossil
AM254 Med Mini Fossil
Same technique again. This time, the small shell was pressed onto the large one
after having rubbed Pearl Ex on both (gold), I pierced a hole, then baked. Then
attached to the bookmark finding, using a jump ring. This piece was not
varnished.
|
 |
 |
|
Shell Votive Holder
using
AM025 Med Fossil
also: glass votive holder, beige and translucent Sculpey III, wax crayon. The technique
used is similar to the faux woodgrain technique but iwth wax crayon inclusions.
|
My Portable
Museum
using
AM025 Med Fossil
AM183 XLge Scarab Fragment
A blend of Silver, White and various blue Sculpey III polymer clay, wire and
beads. Finished off with White Pearl Ex prior to curing.
|
|
|
 |
 |
 |
AM030 XLge Mummy
Height 6cm x Width 2.2cm
|
Egypt
using
AM030 XLge Mummy
also: Sunday International collage stamp, handmade background, vellum, Bazzil
cardstock, mix of Opals colours for casting the mummy
From France's cards section
|
Egypt
using
AM030 XLge Mummy
This mummy was cast in Terra Cotta air dry clay and dry brushed with black
Acrylic paint.
From France's cards section |
|
|
 |
 |
ATC
using
AM024 Med Feather
AM030 XLge Mummy
AM068 Med Egyptian Cat Fragment
Moulds cast in gold and black Premo! Coated with Pledge One Go after curing.
Background is Marvy Metallic Markers and embossing powders.
|
Stubby Pen
using
AM030 XLge Mummy
Also Bic pen, suede thonging, black Sculpey III and Premo!, scrap clay to give
bulk to the pen, gold Pearl Ex, and gold leafing flakes. Idea from Donna Kato's
Millefiori Stubby Pen.
|
Bookmark
using
AM030 XLge Mummy (full and partial)
Moulds cast with some reconditionned FIMO (a blend of colours). Head was
partially cast and a hole was made from top to bottom to make a bead out of it.
Beads were also made otu of clay. Background is made with a stamp by Beeswax
Rubber Stamps.
The bookmark style is inspired by the work of Kathy Martin.
|
 |
|
|
Altered Mini
Clipboard
using
AM030 XLge Mummy
KL Lge Funky Alphabet E, G, Y, P, T
Also used mini clipboard by Collections, Delight Air Dry Modelling Compound, Jo
Sonja paints, and stamp by Inkastamps.
|
|
|
|
 |
 |
 |
AM034 Med Mask
Height 3cm x Width 2cm |
Found Treasures
using
AM034 Med Mask
AM078 Med Conch Shell
AM040 XLge Fossil Snail
AM254 Med Mini Fossil
Using blends
of Sculpey Ultralight, Sculpey III, and Premo. Pieces were cast, cured, and
varnished with Plegde One Go (Australian equivalent of Future Floor Finish).
The chain was purchased in a hardware store. Large jump rings were used. A wee
bit of Pearl Ex was rubbed on the large Fossil before the Pledge One Go dried
completely.
|
Note pad
using
AM034 Med Mask
Cast was done with black hot glue, stamp by Oxford Impressions. Designs
from note pads can also be adapted to ATCs. |
 |
 |
|
ATC
using
AM034 Med Mask
AM146 Lge African Shield no.1
Moulds cast with Delight Air Dry Modelling Compound, and painted with acrylic
paints (Sandstone and Burnt Umber). Background stamp on ATC by Inkastamps,
handmade paper was teared by wetting and then crumpled for added texture.
|
Goldstone Masks
by France Chevalier (DT)
using
AM034 Med Mask
From a
technique on Polymer Clay Central, using Sculpey III, varnished with
Varathane. The beads were hand rolled. |
Bookmark
using
AM003 Med Long Mask
AM034 Med Mask
AM146 Lge African Shield no.1
Using a blend of leftover clays, LizZed Creations papers, black card, and suede
thonging. The bookmark style is inspired by the work of Kathy Martin.
|
 |
 |
|
Fridge Magnets
using
AM034 Med Mask
The larger image will show you a set of three fridge magnets. They were cast
with scrap clay from a project (this would include Premo and Sculpey III), which
I cut in small bits and then pressed together after having sprinkled them with
copper EP. The EP doesn't show a lot but gave a distressed look to the clay. I
think rubbed the pieces with Treasure Gold (Classic) and adhered a magnet to the back with
E6000 glue.
|
Earrings
using
AM034 Med Mask
Gold blue and green Premo. Gold findings. The pieces were varnished with Pledge
One Go after sanding to smooth out the back and the edges. |
|
|
 |
|
 |
AM040 XLge Fossil Snail
Diameter 4.1cm |
Found Treasures
using
AM034 Med Mask
AM078 Med Conch Shell
AM040 XLge Fossil Snail
AM254 Med Mini Fossil
Using blends
of Sculpey Ultralight, Sculpey III, and Premo. Pieces were cast, cured, and
varnished with Plegde One Go (Australian equivalent of Future Floor Finish).
The chain was purchased in a hardware store. Large jump rings were used. A wee
bit of Pearl Ex was rubbed on the large Fossil before the Pledge One Go dried
completely.
|
3"x3" Notebook
using
AM040 XLge Fossil Snail
Snail cast with Pearl and Translucent Sculpey III, aged with Burnt Umber paint,
and varnished with Pledge One Go mixed with some Silver Pearl Ex.
The book was put together with the Zutter binding system.
|
 |
 |
 |
Blue Fossil
using
AM040 XLge Fossil Snail (partial)
Fossil was partially cast with a mix of blue and translucent Sculpey III clay,
and silver leafing flakes. The cast was dusted with Micro Pearl Pearl Ex prior
to baking.
|
Seashore Hair
Clip
using
AM040 XLge Fossil Snail
AM083 Med Seashore
Chocolate, gold and a brown mix of leftover polymer clays (were blended and
marbled to make this piece. The Seashore casts were cut to fit on each side of
the Fossil, on the barrette blank. The little "coral" bits were hand made. The
clay was glued onto the barrette with E6000 glue. |
Calendar
using
AM040 XLge Fossil Snail
This was done with scrap clay from a friend who makes gorgeous beads. I just
took a chunk of her clay and moulded it, and added a teeny bit of Antique Silver
Pearl Ex. I did however roll the scrap clay into a ball and swirled it (as if
making a swirl bead) before pressing it into the mould. |
 |
|
|
Treasure
using
AM040 XLge Fossil Snail
Fossil cast with air dry clay, colour was added while making the background,
i.e. sponged with alcohol inks (Pinata). When the ink was dry, the fossil was
covered in gold paint, which was then wiped off the top with a slightly wet
sponge.
Dymo tape was coloured with Krylon Leafing Pen.
From France's ATC section |
|
|
|
 |
 |
 |
AM041 XLge Asian Symbol No 1
Height 3.3cm x Width 3.3cm
|
Blue Necklace
using
AM041 XLge Asian Symbol No.1
Symbol cast with various blue hues of polymer clay, and the top coat (the first
coat placed in the mould) was Sculpey III Translucent. The symbol and sides of
the mould were traced with an embossing pen and embossed with gold EP.
|
Serenity (top portion)
using
AM041 XLge Asian Symbol 1
AM042 XLge Asian Symbol 2
RP290 Dragonfly Set
(from France's Flag Book) |
 |
 |
 |
Note Pad
using
AM041 XLge Asian Symbol No.1 (partial)
A blend of green and blue Premo, leftover from another project, was rolled in a
ball and pressed into the mould to form this partial cast.
The background was done with Jo Sonja acrylic paints and crackle medium. The
stamp is by About Art Accents. The notebook was taken apart and the cover was
used as template for the new cover.
|
Bookmark
using
AM097 Med Buddha Head
AM041 XLge Asian Symbol No 1
Cast with a Jade Blend made with Scupley III Clays, Pale Gold Jo Sonja paint,
LizZed Creations Papers, black card, black suede thonging. The bookmark style is inspired by the work of Kathy Martin.
This was later made into a
different
bookmark. |
Japanese Bookmarkusing
AM041 XLge Asian Symbol No 1
Cast with a Jade Blend made with Scupley III Clays. Highlighted with Pale Gold
Jo Sonja paint.
Paper by LizZed Creations.
This bookmark is a new incarnation of one I had
previously
made.
The bookmark style is inspired by the work of Kathy Martin. |
|
|
 |
 |
Samurai Man
using
AM024 Med Feather
AM041 XLge Asian Symbol No 1
AM042 XLge Asian Symbol No 2
AM043 XLge Asian Symbol No 3
for more information see France's Screen Project. |
Manchu Man
using
AM041 XLge Asian Symbol No 1
AM073 Lge
Chinese Proverb
for more information see France's Screen Project.
|
Asian Chocolate Squares
using
AM041 XLge Asian Symbol No 1
AM042 Xlge Asian Symbol No.2
AM043 Xlge Asian Symbol No.3
Also Dark Chocolate Melts. |
|
 |
 |
|
AM042 XLge Asian Symbol No 2
Height 3.2cm x Width 3.2cm
|
PostIt© Note Book
using
AM042 XLge Asian Symbol No.2
Symbol cast with Air Dry Clay and painted with Lumiere Blue and Green (from my
miscellaneous section) |
Serenity (top portion)
using
AM041 XLge Asian Symbol 1
AM042 XLge Asian Symbol 2
RP290 Dragonfly Set
(from France's Flag Book)
|
 |
 |
 |
Page from
Altered Board Book
Dragon's Fortune
using
AM076 Lge Chinese Dragon
AM042 XLge Asian Symbol No.2
(more information here)
|
ATC
using
AM042 XLge Asian Symbol No.2
AM013 Sm Asian Coin Medal
Moulds were
cast with Delight Air Dry Modelling Compound and painted with Crafter's Acrylic Paint in Pale Pink, and Jo
Sonja's Indial Red Oxide, then varnished with Pledge One Go (Future Floor Finish
equivalent).
|
ATC
using
AM042 XLge Asian Symbol No.2
Using a mix of Premo Tranluscent and Green clays to get a Faux Jade look. Patina
done with gold paint. Asian Tree stamp (Inkastamps) stamped in Versamark and
embossed in gold on matt gold card.
|
|
|
 |
|
Samurai Man
using
AM024 Med Feather
AM041 XLge Asian Symbol No 1
AM042 XLge Asian Symbol No 2
AM043 XLge Asian Symbol No 3
for more information see France's Screen Project. |
Weeping Willows in Purple
as seen in VampStampNews (June 06)
using
AM042 XLge Asian Symbol No.2
also stamp by About Art Accents and background made witha Lumiere wash. |
Asian Chocolate Squares
using
AM041 XLge Asian Symbol No 1
AM042 Xlge Asian Symbol No.2
AM043 Xlge Asian Symbol No.3
Also Dark Chocolate Melts. |
|
 |
 |
|
AM043 XLge Asian Symbol No 3
Height 3 cm x Width 3 cm
|
Weeping Willows
using
AM043 XLge Asian Symbol No.3
also stamp by About Art Accents and background made with Walnut ink and
Adirondack Color Wash (Denim). |
Asian Chocolate Squares
using
AM041 XLge Asian Symbol No 1
AM042 Xlge Asian Symbol No.2
AM043 Xlge Asian Symbol No.3
Also Dark Chocolate Melts. |
 |
 |
|
ATC
using
AM043 XLge Asian Symbol No.3
Using a mix of Premo Tranluscent and Green clays to get a Faux Jade look. Patina
done with gold paint. Postage stamps (Inkastamps) stamped in Versamark and
embossed in gold on matt gold card.
|
Japan
using
AM001 Med Asian Coin Extra Large
AM013 Sm Asian Coin Medal
AM043 XLge Asian Symbol No 3
KL Lge Funky Alphabet
J, A, P, N
for more information see France's Screen Project. |
Samurai Man
using
AM024 Med Feather
AM041 XLge Asian Symbol No 1
AM042 XLge Asian Symbol No 2
AM043 XLge Asian Symbol No 3
for more information see France's Screen Project. |
 |
 |
|
Altered Mint Tin
using
AM043 XLge Asian Symbol No 3
AM309 Lge - Face with Turban
Also used a mint tin (Eclipse), black Premo! polymer clay, gold leaf foil, and
some Kato Liquid Medium to ensure good adhesion to the tin.
|
Hanging Ornament
using
AM043 XLge Asian Symbol No.3
Symbol cast with red Premo, highlighted with gold Krylon pen, top bar was
stamped with a stamp from About Art Accents.
|
|
|
 |
 |
 |
AM068 Med Egyptian Cat Fragment
Height 3.4cm x Width 2.5cm
|
ATC
using
AM068 Med Egyptian Cat Fragment
also stamps by Beeswax Rubber Stamps, Sculpey III and Premo polymer clay (Dark
Blue mix, and blend of blues and greens) - Images stamped in VersaMark with gold
Pearl Ex.
|
Earrings
using
AM068 Med Egyptian Cat Fragment
also used findings, beads, Sculpey III and Premo polymer clay (Dark Blue mix,
and blend of blues and greens)
|
|
|
 |
 |
ATC
using
AM024 Med Feather
AM030 XLge Mummy
AM068 Med Egyptian Cat Fragment
Moulds cast in gold and black Premo! Coated with Pledge One Go after curing.
Background is Marvy Metallic Markers and embossing powders.
|
Three Kittens
using
AM068 Med Egyptian Cat Fragment
AM176 XLge Cat No 1
Moulds cast with Delight Air Dry Modelling Compound and painted with Lumiere
Acrylic paint. Background is a Lumiere Wash. Crackle stamp by Inkastamps. |
Tissue Blade
Holder
using
AM068 Med Egyptian Cat Fragment
Also used a mix of Premo and Sclupey III Clay, gold leafing flakes, Gold Pearl
Ex, and Pledge One Go as sealant.
With big thanks to Marie-Hélčne
for the idea and the tutorial on Parole de Pate! |
 |
|
|
Pendant
using
AM068 Med Egyptian Cat Fragment
Done with a pink mix and black Sculpey III. Dusted with Pearl Ex (gold) and
sealed with Pledge One Go.
|
|
|
|
