Latest Jewellery/Jewelry Items
|
 |
 |
 |
Etruscan Pendant
using
AM019 Med Etruscan Shield
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique.
The Aanraku bail was glued with LockTite Gel. |
Swirl Me
using
AM332 X5Lge 7 UP
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique. |
Blue Donut
using
AM121 Lge Donut Large
Using Green and Blue Pearl polymer clay, and silver leaf.
|
 |
 |
 |
Pink Fangipani
using
AM352 X3Lge 2 Frangipani
Blend of Pearl and Red Sculpey III and Premo! |
Pretty In Pink
using
AM289 XLge Cameo 1 Girl
Blend of Pearl and Red Sculpey III and Premo! |
I Love Frangipanis!
using
AM352 X3Lge 2 Frangipani
Cast with Premo Polymer Clay |
|
|
 |
 |
|
|
Woven Wire Bracelet
using
AM331 X5Lge 6 UP
Cast with a blend of Pearl and Green Sculpey III, wire woven as per instructions
in a book by Linda L. Chandler, Linda L., |
Watercolor Shield Bracelet
using
AM019 Med Etruscan Shield
Using a technique by Maggie Maggio, explained on
Parole de Pate
(in English
here ).
|
 |
 |
 |
Metallic Look Necklace
using
AM346 X6Lge African Masks by Michelle Zimmerman
Cast in Polymer Clay, dusted with Silver Pearl Ex.
|
Necklace
using
AM346 X6Lge African Masks by Michelle Zimmerman
Cast in Polymer Clay rolled in Bronze Embossing Powder. |
Necklace
using
AM356 X3Lge Lantern and Cat
Made with a blend of Pearl Blue and Pearl Green Polymer Clay. Beads were made
with the AMACO Tri-Bead Roller.
|
 |
 |
|
Maggio Watercolor Pendant
using
AM283 Lge - Goddess Doll Blank by Cathy Daulman
Using a technique by Maggie Maggio, explained on
Parole de Pate
(in English
here ). |
Whimsical
using
AM283 Lge - Goddess Doll Blank by Cathy Daulman
Made with some leftover polymer clay. Printed wings from Inkastamps. Eyelets
were used for the eyes and "womb". This can be used as a brooch,
a hat pin, a pendant, a fridge magnet, etc.
|
Maki Neko Bracelet
using
AM332 X5Lge 7 UP
AM356 X3Lge Lantern and Cat
Cast with a blend of Sculpey III and Kato Clay (both translucent) and coloured
with alcohol inks. Beads were threaded onto memory wire (going around the wrist
5 times) and the charms were then attached with jump rings.
Different view:
|
|
|
 |
|
|
|
Jade, Cinnabar and Onyx
As seen in VampStampNews (June 08)
using
AM309 Lge - Face with Turban
Stamp used for beads by AboutArtAccents.
|
|
 |
 |
 |
Avocado Earrings
using
AM353 X5Lge 4 Facets
Avocado Friendly Plastic was used to cast this, and the beads were formed with
the leftover Friendly Plastic. |
Leafy Bracelet
using
AM337 X3Lge 3 Leaves by Michelle Zimmerman
Cast with a blend of Friendly Plastic. Beads threaded on Memory Wire.
|
Frangipani in Blue
using
AM352 X3Lge 2 Frangipani
Cast with a blend of Sculpey III and Kato Clay (translucent) and coloured with
alcohol inks. Silver leaf was also used for the speckly effect.
Buna cord from I.B.Moore.
|
 |
 |
 |
Face on Mars Earrings
using
AM1003 Med Cathy's Square Face
Cast with scrap clay, and buffed when cured. |
Shimmering Stone
using
AM057 Lge Stepping Stone
Cast with scrap clay (it was very grey) and coloured with Pearl Ex. The back was
stamped with a Stampsmith stamp prior to unmoulding the cast.
See the stamped back of the pendant:
 |
Buggy Bracelet
using
AM014 Med Egyptian Bug
Made with FIMO Translucent Clay, and Alizarin Crimson Premo. The pieces were
cast, cured, then painted with a wash of Rose Gold Jo Sonja paint with a bit of
Pledge One Go. When that was dried, they were given another coat of Pledge One
Go. Beads were threaded on three pieces of memory wire, which were glued inside
small holes on the side of the mould, using Loctite Gel.
|
 |
The Hand
using
AM336 XXLge Decorative Hand
AMKT16 X4Lge RoseHead Texture
Cast with a blend of Gold and Translucent clay. The Texture Sheet was pressed on
the back of the mould prior to unmoulding. The back was lightly rubbed with Gold
PearlEx and the front too to highlight the design.
|
 |
|
|
Red Deco Gals
using
AM276 Med Deco Face
Cast with leftover red clay and rubbed with Interference Red Pearl Ex (Jacquard)
|
|
Blue Earrings
using
AM338 Small Mini Sphinx
Cast with a blend of Sculpey III and Kato Clay (both translucent) and coloured
with alcohol inks.
This image shows the translucency of the clay:
 |
 |
 |
 |
Heart with Wings
(brooch, magnet, or embellishment)
using
AM318 XXLge Dragonfly Wings Set
Also used Friendly Plastic in Swirl/Blue, Purple, and Fuschia, and a heart
shaped cookie cutter. |
Leafy Dragon
AM169 XLge Dragon Pendant
AM269 Lge Leaf (2)
Using a blend of green clay (Premo! or Sculpey III) and some Sculpey Ultralight,
and seed beads.
|
A Secret
AM282 XLge - Indented Oval Shape
Image transfer on white Premo cast. Image from Inkastamps.
This pendant won a Gallery Pick Competition from Inkastamps in October 2006. |
|
|
|
Deep Green Sea
using
AM282 XLge - Indented Oval Shape
(could also be done using
AM190 XLge - Shape Oval)
Suze Weinberg UTEE (Clear) was poured in the mould, and while still hot some
pieces of Fantasy Film were dropped in the UTEE (Satin, In The Glen, In The
Forest) and heated again to change their colour. Some In The Forest was then
placed at the back of the mould, then some Fernglade Opals were poured to fill
up the mould. Gold wire was used to make the bail and wrap around the cast in
the indentation (no indentation in AM190 though).
|
Rusty Pendant
using
AM317 X3Lge Celtic Shield
AMKT10 X4Lge Filigree Texture
Blend of scrap clay, varnished with Pledge One Go with Pearl Ex. I used the
filigree texture sheet on the back of the mould prior to unmoulding the shield.
|
Collage Pendant
using
AM354 XXLge Japanese Collage
Using come scrap clay (mostly Chocolate and Gold) and some gold Pearl Ex. On the
back I stamped a script, prior to unmoulding.
|
|
|
|
Autumn Leaves
using
AM337 X3Lge 3 Leaves by Michelle Zimmerman
Using black polymer clay (Premo!), gold leaf, and alcohol inks. Copper wire was
twirled using the Coiling Gizmo. |
Macramé Scroll Beads
using
AM113 Lge 5 Scrolls
AM331 X5Lge 6 UP
Clay, Pearl-Ex, and some silk cord, and old skills learned in the 70s (macramé). |
The Sun Rises over the Land
using
AM345 XXLge African Shield by Michelle Zimmerman
Still playing with one of my
favourite blends.
Also used copper wire, about 20 ga.
Close up of the shield
 |
|
 |
|
Wing Necklace
using
AM123 XXLge Set of Wings (1)
Also used Friendly Plastic in Black, African Violet, MOP and Fuschia. |
Friendly Dichroïcity
using
AM245 4XLge 5 Dominoes
Using Friendly Plastic (Indian Red, Cobra Silver, Black and some blue from
a very old kit) |
Green Scarabs
using
AM104 Med Scarab
Also used Friendly Plastic in Floral Garden, Avocado and Dark
Teal |
|
|
 |
Fridge Magnet or Brooch
using
AM344 XXLge 3 Crowns
Also used Friendly Plastic in Orange Copper, Rainbow, and Black. |
Fridge Magnet or Brooch
using
AM344 XXLge 3 Crowns
Also using Friendly Plastic in Orange Copper, Rainbow, and Black, cookie
cutter, and Paper Artsy wings. |
Fridge Magnet or Brooch
using
AM344 XXLge 3 Crowns
Also used Friendly Plastic in Orange Copper, Rainbow, and Black. Also used
avocado for the background.
|
|
 |
 |
Earring Caddy
using
AM035 Sm Puffy Heart
Using leftover polyclay. Pattern from a project by Stacey Apeitos. For the
earrings hung on the caddy, please see France's
Miscellaneous Items page
|
Pendant
using
AM331 X5Lge 6 UP
Using Pearl White polymer clay and some black. Lightly highlighted with Pearl
Ex. |
Green Symbol
using
AM041 XLge Asian Symbol No 1
Also using Pearl Polymer Clay and Pinata Alcohol Inks. |
 |
|
 |
Geisha Necklace
using
AM339 XLge Geisha Head
also used Amaco's Bead Roller #8
Translucent and Alizarin Crimson clay, and Arnold Gumner Flakes |
Earrings
using
AM352 X3Lge 2 Frangipani
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique.
An Amaco Bicone Bead Roller was also used |
Frangipanis by the Beach
using
AM352 X3Lge 2 Frangipani
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique.
An Amaco Bicone Bead Roller was also used. |
Sets |
 |
 |
 |
Petals Set Necklace and Earrings
using
AM058 Med 12 Petals
AM270 Med Mini 12 Petals
Instructions for finish/colouring taken from
e-Patterns.com |
Brooch and Shoe Clips
using
AM058 Med 12 Petals
AM270 Med Mini 12 Petals
Using a blend of Sculpey III and some Aztec Gold Pearl Ex.
This view shows
the back of the clip. |
Hair Clip (Barrette) and Post Earrings
using
AM058 Med 12 Petals
AM270 Med Mini 12 Petals
Using Translucent Sculpey III and some Blue and Green Pinata Inks (Jacquard). A
little ball of clay was pressed into the moulds to form the partial casts for
the earrings.
|
|
|
 |
|
|
|
Bolo Tie and Cuff Links
AM113 Lge 5 Scrolls
AM252 Med Mini 5 Scrolls
Used a blend of Pearl Green and Pearl Sculpey III, and some Interference Green
Pearl Ex, lightly, prior to baking.
close up of cuff links |
|
Bracelets |
|
|
 |
|
|
|
Bracelet
using
AM341 X4Lge Petra's Shells Set 1
AM342 X4Lge Petra's Shells Set 2
AM343 X4Lge Petra's Shells Set 3
Cast from the
Faux Abalone technique from Polymer Clay Central. Also used some seed beads,
crimps and a clasp.
|
|
 |
 |
|
Bracelet
using
AM308 XLge - Mini Dragonfly
AM330 X5Lge 8UP
Cast with a blend of Gold, Emerald, and Cobalt Blue Sculpey III. This piece is
not varnished. |
Gum Leaf Bangle
using
AM182 XLge Stylized Gumleaf
AM211 Lge Stylized Gumleaf (reduced)
AM259 Lge Mini Stylized Gum Leaf
Using Gold and Leaf Green Sculpey III, this bangle was moulded over a tin of
soda (or beer), baked on the tin, and then the tin was squished to remove the
bangle.
|
Pink Swirl Fun Bracelet
using
AM245 4XLge 5 Dominoes
Cast with a blend of Pearl, Translucent, and Red Sculpey III. The charm idea was
borrowed from
Leelooboobeejoo.
Different view (scanned):
 |
 |
Fleur De Lys Bracelet
using
AM138 Lge - Fleur D'lyse Distressed
AMKT10 X4Lge - Filigree Texture
Also used Green Premo, Black Premo (very small amount to make veins in the
green), gold Pearl Ex, jewellery findings. |
Pendants/Necklaces |
 |
 |
 |
My Domino
using
AM240 XLge Right Hand (partial)
AM245 4XLge 5 Dominoes
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique |
Faux Porcelain Necklace
using
AM062 Med Oval Waves
Cast with Sculpey Ultralight, covered with Tinted Kato Clear Medium. Kato Medium
will be available in colours sometime in 2008.
different view:
A tutorial for this technique can be found at
Polymer Clay Polyzine
|
Shell
Necklace
using
AM341 X4Lge Petra's Shells Set 1
AM342 X4Lge Petra's Shells Set 2
AM343 X4Lge Petra's Shells Set 3
Cast from the
Faux Abalone technique from Polymer Clay Central. Also used some seed beads,
crimps and a clasp. |
 |
 |
 |
Patriotic Pendant
using
AM326 XXLge Engraved Fleur d'Lyse
Cast with scraps of Sculpey III in pinks and purples, and some translucent as
well. This piece was cast, baked, and buffed with a felt wheel.
|
Faux Bone Necklace
using
AM330 X5Lge 8UP
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique
|
Egyptian Necklace
using
AM320 X3Lge Half Circle
Cast with Sculpey III and Premo Polymer Clays using this
Faux Bone technique
Closer view of the Half Circle:
|
 |
 |
 |
Blue Art Deco
Pendant
using
AM060 Lge Sq Stepping Stone
This was cast using scraps of clay, and buffed with a felt wheel. |
Amphora
using
AM330 X5Lge 8UP
Cast with leftover clay scraps.
Amphora instructions by
Tina Holden |
Scarab Necklace
using
AM183 XLge Scarab Fragment
I first cast the scarab portion of the mould with a blend of greens, using
Sculpey III, and then some gold added to fill the rest of the mould. The beads
and toggle bead were hand rolled.
|
 |
 |
 |
Faux Bone Transfer Pendant
using
AM223 Lge Oval Cab Rope Edge
This cabochon was moulded from a simple
Faux Bone technique, I let it rest
in the mould for a few minutes prior to unmoulding, then did a colour photocopy
transfer onto the surface, and cured.
|
Mokume Gane Pendant
using
AM223 Lge Oval Cab Rope Edge
Simple Mokume Gane using Translucent Clay (Katoclay, and Sculpey III) and
Tangerine Pinata Inks (Jacquard).
|
Mosaic Necklace
using
AM223 Lge Oval Cab Rope Edge
A cane was made into a mosaic and pressed in the mould, the excess was carefully
cut off taking care to not cut the mould, and the back of the mould was then
filled with Gold Sculpey III Clay. Bicone beads were created with the same
blend, and a bead roller (Amaco).
Closer view of pendant:
|
 |
 |
|
Black Pearl African
Pendant
using
AM102 Lge African Head
Cast with a blend of Pearl and Black Sculpey III, highlighted with black Rub
Ons. |
Velvet Choker
using
AM058 Med 12 Petals
AM270 Med Mini 12 Petals
Using Translucent Sculpey III and some Alizarin Crimson Premo, I also mixed in
some Arnold Grummer's Irridescent Flakes. The casts are adhered to a velvet
ribbon choker.
|
Egyptian Bug Necklace
using
AM014 Med Egyptian Bug
Made with FIMO Translucent Clay, and Alizarin Crimson Premo. The pieces were
cast, cured, then painted with a wash of Rose Gold Jo Sonja paint with a bit of
Pledge One Go. When that was dried, they were given another coat of Pledge One
Go.
Click for a close up of one of the beads:
|
 |
 |
 |
Pendant
using
AM294 XXLge Rose Cameo
Cast with a blend of Green Leaf and Gold polymer clay (Sculpey III), highlighted
with Autumn Gold Treasure Gold. |
Faux Jade Koi Pendant
using
AM188 Med Tag Oval Small
A blend of green and transluscent Kato Clay was used to make this pendant. Stamp
by Inkastamps.
As seen in VampStampNews
(June 2007) |
Necklace and Hair Pin Set
using
AM260 XLge Ginko (medium) (3.8 x 4.2cm)
AM278 Lge - Mini Ginko (2.9 x 3.3 cm)
Using a blend of Pearl and Green Pearl Sculpey III. |
 |
 |
 |
Little Jade Frog
by France Chevalier (DT)
using
AM192 Small Tag Rect
AM251 Sm Mini Frog
Faux Jade blend done with translucent clay and Leaf Green Sculpey III. Frog
highlighted with Treasure Gold (Gold).
Varnished with varathane. |
Faux Abalone Pendant
by France Chevalier (DT)
using
AM188 Med Tag Oval Small
Simply cast using the
Faux Abalone technique from Polymer Clay Central.
Sanded and varnished with varathane (Flecto).
|
Pendant
using
AM315 XXLge Heiroglyphics
Cast with a mix of Translucent, Green, Turquoise and Pearl Green Premo/Sculpey
III clay. Very lightly rubbed with Pearl Ex to accentuate the design. Varnished
with Pledge One Go. This will be strung on a choker or a leather lanyard.
|
 |
 |
 |
Gold and Black
Dragon
using
AM316 XXLge Celtic Dragon
also Black and Gold Premo, Treasure Gold, Pledge One go. Jump ring and leather
lanyard. |
Black and Silver Pendant
using
AM192 Small Tag Rect
AM331 X5Lge 6 UP
Cast with a blend of clays, mostly Black Sculpey III but a bit of Pearl Sculpey
III.
Highlighted with Silver Pearl Ex prior to baking.
The circle cast was placed on top of the hole marking on the Small Tag, and I
pierced a hole at the other end with a drill.
|
Industria Tag
using
AM090 XLge Mask
RP360 XLge Broken Arch
Mask was cast with white Premo and cured as per package directions, also used silver paint, Collections Ephemera,
decorative papers, and Frayed Burlap Distress inkpad.
|
 |
 |
 |
Dragonfly Necknace
using
AM209 XXLge Dragonfly
Also Buna cord glued to shallow holes in each wing, and Chocolate and Gold
Sculpey III and a technique for "Faux wood" by Carol Blackburn from her book
"Making Polymer Clay Beads".
See matching Earrings. |
Wooden Flower
using
AM188 Med Tag Oval Small
AM277 Lge Small Clover
Used a blend of Sculpey III Polymer Clay in Tan, Maroon, Ivory, Sweet Potato,
Chocolate.
The clover cast was placed on top of the hole marking on the Small Oval
Tag, and I pierced a hole at the other end with a drill.
This piece was recycled into a
bookmark when my Mum started rummaging through my pieces, and needed
bookmarks!
|
Little Froggies
using
AM063 Sm Miss Froggy
AM080 Lge Skeletal Leaf
AM251 Sm Mini Frog
AM255 Lge Mini Skeletal Leaf
Using a blend of Pearl and Green Pearl Sculpey III. Some Feathers Threads were
threaded through the links of the chain. |
 |
 |
 |
Wrap Over Choker
using
AM260 XLge Ginko (medium)
A blend of Chocolate and Gold Sculpey III were used to cast this mould.
|
Necklace
using
AM021 Lge Rectangle Fragment
Simply cast using the
Faux Abalone technique from Polymer Clay Central.
Sealed with some Pledge One Go and silver Pearl Ex. |
Eye of the Dragon
using
AM316 XXLge Celtic Dragon
Using a blend of colours from Sculpey III.
Varnished with varathane.
|
 |
 |
 |
Pendant/Choker
using
AM088 XLge 2 x Queen Nefertiti (large one used)
The hat and collar were cast with a blend of Gold, Black, and Red Sculpey III,
the body with some Translucent Sculpey III mixed with a small amount of Red
Sculpey III. Varnished with Pledge One Go. |
Deco Pendant
using
AM279 Med Deco Accent
AM288 XXLge Heart Plaque
Also a blend of Gold and Leaf Green Sculpey III, Jo Sonja Rich Gold paint for highlights, and Pledge One Go as varnish. |
Arabian Mask Pendant
using
AM136 XLge Mask Arabian Lge
Also Translucent Fimo, Azarin Crimson Sculpey III, Pledge One Go Glaze, and Gum
Arabic with Russet Pearl Ex.
The top portion of the pendant was shaped from the headdress.
|
 |
 |
 |
Necklace
using
AM113 Lge 5 Scrolls
also a blend of Blue Premo, and Silver and White Sculpey III polymer clay. Bali
silver findings, and Micro Pearl Pearl Ex.
|
Pendants
using
AM106 Lge Cartouche No 1
left one:
Middle one: a blend of Gold, Black, and Red Sculpey III. Highlighted with Autumn
Gold Treasure Gold.
Right one:
All three pieces were varnished with Pledge One Go.
|
"The Scream" Pendant
using
AM188 Med Tag Oval Small
Cast with a blend of Gold, Emerald, and Cobalt Blue Sculpey III, with a tiny
amount of Translucent.
I didn't varnish this piece as I loved the petrified wood look it had. (This
reminds me of the painting The Scream by Munsch somehow) |
  |
  |
 |
Pendant Front and Back
using
AM273 XLge - Indented Pendant Shape
Also used Opals, above are the front view and back views. I like how the opals
is different depending on whether it's the beginning of the pour (the face
inside the mould) or how you finished pouring (the back of the mould). I painted
a coat of Pledge One Go on the front side (on the left) to give it a bit more
shine. |
Pendant Front and Back
using
AM273 XLge Indented Pendant Shape
Using Sculpey III. This was cast first with one technique (based on Faux
Turquoise, using Acrylic Paint) and another (marbling) was used to fill the
mould at the back.
|
Necklace
using
AM324 XXLge 4 Fleur d'Lyse
Also used Opals |
 |
 |
 |
Found Treasures
using
AM034 Med Mask
AM078 Med Conch Shell
AM040 XLge Fossil Snail
AM254 Med Mini Fossil
Using blends
of Sculpey Ultralight, Sculpey III, and Premo. Pieces were cast, cured, and
varnished with Pledge One Go (Australian equivalent of Future Floor Finish).
The chain was purchased in a hardware store. Large jump rings were used. A wee
bit of Pearl Ex was rubbed on the large Fossil before the Pledge One Go dried
completely.
|
Fairy Necklace
using
AM303 XXLge Fairy Cameo
See an ATC I made using the same
pendant, so you can offer it on an ATC as well.
Mould cast with Translucent Sculpey III mixed with a smidgeon of red, and
glitter (Pastel Apricot). |
Egyptian
Necklace
using
AM320 X3Lge Half Circle
Technique based on the Mokume Gane, using Premo Gold, Cobalt Blue mixed with a
bit of translucent, and Gold mixed with Yellow, as well as gold leaf.
The pieces were cast, and highlighted with Aztec Gold Pearl Ex prior to curing.
|
 |
  |
Swirly Heart
using
AM035 Sm Puffy Heart
and custom blends of Sculpey III to make Purple (blue, red and white) and Pink
(red and white). The technique used is the same as for Swirled Lentil Beads, I
used half a ball of pink and half a ball of purple, and swirled. When the swirl
was to my liking, I pushed the point into the mould and carefully cut off the
extra clay at the back.
|
Medallion
using
AM084 Lge Weathered Flower
AMKT10 X4Lge Filigree Texture (back)
also used black Premo, silver Pearl Ex. The back texture was pressed on while
the Premo was still in the Weathered Flower mould. The medallion was dusted with
Pearl Ex (using my finger) and the holes were pierced prior to curing. The chain
and jump rings are from Ribtex.
|
 |
 |
 |
Your Love Spins Me 'round
using
AM035 Sm Puffy Heart
and custom blends of Sculpey III to make Purple (blue, red and white) and Pink
(red and white)
and the Swirl Lentil Bead technique, but when the swirl is the way I like it, I
push it in the mould and cut off the extra, carefully, at the back. For this
heart, the clay was twisted and blended before swirling.
|
Mandolin Girl
using
AM282 XLge Indented Oval Shape
Using white Premo and alcohol photocopy transfer.
|
Mask Necklace
using
AM003 Med Long Mask
Mix of Gold and Brown Premo.
|
 |
 |
 |
Checkit Necklace
using
AM213 Lge Check It Shape
AM1004 Med Cathy's 'The Face'
Moulds cast with black Premo,
Checkit piece and face were coloured with Marvy Metallics after curing. The
Check It shape was stamped with a text stamp in Memories Black. The Face was adhered to the game piece with Crystal Lacquer and then
beads were added to the side (also with CL).
|
Pendant/Necklace
using
AM052 Med Egyptian Triangle
Made with a cane fabricated
as per the
directions on
Parole de Pâte.
Rubbed with Pearl Ex prior to curing. Varnished with Pledge One Go. |
Paua Pendant
using
AM116 Lge Oriental Pendant
and a variety of Premo colours, see the way I did it in our
Tips and Techniques page |
Earrings |
 |
 |
 |
Earrings
using
AM341 X4Lge Petra's Shells Set 1
Cast with Pearl clay coloured with a small portion of Pearl clay which had been
tinted with Pinata inks (a bit of green and some yellow). Brushed (with my
finger) with Irridescent Green Pearl Ex.
|
"Love that Cane" Earrings
using
AM320 X3Lge Half Circle (partial)
Partially cast the mould with a cane made of
green, blue, turquoise, yellow and gold Sculpey III. Gold leafing flakes,
as per the directions on
Parole de Pâte.
Rubbed with Treasure Gold once cured. |
Earrings
using
AM062 Med Oval Waves
Cast with a blend of polymer clay covered with a thin layer of Pearl clay
|
 |
 |
 |
Pink Earrings
using
AM230 Lge Sq Pattern
Cast with a blend of Pearl, Translucent, and Red Sculpey III. |
Faux Bone Earrings
using
AM094 Med Circles
Using a simple but fantastic
Faux Bone technique
and Premo! clay.
|
Dragonfly Earrings
using
AM308 XLge - Mini Dragonfly
Chocolate and Gold Sculpey III as per a technique for "Faux wood" by Carol
Blackburn from her book "Making Polymer Clay Beads" were used to cast the mould.
See matching necklace.
|
 |
|
 |
Autumn Gingko Earrings
using
AM278 Lge - Mini Ginko
Using a blend of Sculpey III and Premo Clays, which were made into a swirl bead,
which was cut in two and pressed into the moulds.
matching brooch |
Little Froggies
using
AM063 Sm Miss Froggy
AM080 Lge Skeletal Leaf
AM251 Sm Mini Frog
AM255 Lge Mini Skeletal Leaf
Using a blend of Pearl and Green Pearl Sculpey III. Some Feathers Threads were
threaded through the links of the chain. |
Earrings
using
AM211 Lge Stylized Gumleaf (reduced)
AM259 Lge Mini Stylized Gum Leaf
Using Gold and Leaf Green Sculpey III
|
 |
 |
 |
Earrings
using
Earrings which need rescanning
AM052 Med Egyptian Triangle
Blend of white, black, translucent and gold Sculpey III. Varnished with Pledge
One Go. Slightly highlighted with Gold Treasure Gold.
|
Turquoise Bugs
using
AM014 Med Egyptian Bug
Combining a few recipes to make a Faux Turquoise stone, using Sculpey III and
Premo Polymer Clay, acrylic paint, and black sand. The pieces were varnished
with a coat of Pledge One Go (which is similar to Future Floor Finish). |
Earrings
using
AM017 Med 5 Flowers
A mix of Sculpey III clay to cast the mould, and that same mixed was shaped into
two tube beads. |
 |
 |
 |
Earrings
using
AM082 Med Mr Toad
Cute little toadies cast with a blend of Leaf Green, Gold and translucent
Sculpey III. Varnished with Pledge One Go. |
More Scarabs for Me
using
AM104 Med Scarab
Also a chunk of scrap clay from a clay pal of mine. I just loved the colours as
they were, and decided to keep this pair of earrings for myself. |
Earrings
using
AM104 Med Scarab
These scarabs were cast with scraps of chocolate clay with much more gold added
and some translucent (Scupley III). Varnished with Pledge One Go. |
 |
 |
 |
Earrings
using
AM107 Lge Pharoah Profile
Cast with a blend of blues and silver PC (Sculpey III or Premo), this was an
early attempt at "faux stone", Just found a bit in my stash and used it for
these Pharaohs.
Varnished with Pledge One Go. |
Earrings
using
AM088 XLge 2 x Queen Nefertiti (small one used)
This was made using one of my favourite and simplest blend, Gold and Chocolate
Sculpey III. Varnished with Pledge One Go. |
Earrings
using
AM279 Med - Deco Accent
Cast with a blend of mostly Emerald Green, with a bit of Gold and Cobalt Blue
Sculpey III added. Varnished with Pledge One Go. The top piece was done by
casting a portion of the mould and trimming it to even out the edges. |
 |
 |
 |
Ginkgo Earrings
using
AM278 Lge Mini Ginko
also silver, translucent and black Sculpey III/Premo. Silver earring findings. |
Earrings
using
AM255 Lge - Mini Skeletal Leaf
Also used a mix of green and gold Sculpey, jewellery findings.
|
Earrings
using
AM253 Med Mini Pansy
Used a blend of Opals (including Lady Baron ~ Purple, and Fool's Gold), Jo Sonja
Rose Gold acrylic paint for highlights, and jewellery findings from Bead Co.
|
 |
|
 |
1001 Nights
using
AM143 Med - Mask Arabian (Small)
Mix of
Sculpey III colours in blues and translucent. Krylon leafing pen, jewellery findings. |
|
Sculpey Ultralight Buddha Earrings
using
AM181 Lge Buddha Head
Casts
moulded with Sculpey UltraLight, painted with Acrylic Paints and Treasure Gold.
The background was done with an Oriental Text Stamp from Beeswax pressed onto
the back of the mould. These are surprisingly light for their size. |
My Etsy Shop of items
made with Krafty Lady moulds:
|
